Home / 8.8 Zinc Plated Steel M7 Bolts

Order List Summary

Goods Total

= £

Delivery

VAT @%

= £

Grand Total

= £

Free Delivery

	on UK orders of over £40 nett.
	on EU orders of over £60 nett.

8.8 Zinc Plated Steel M7 Bolts

Difficult to source M7 bolts. M7 is an unusual thread size not usually available off the shelf, except in the realm of spare parts. However, we stock a number of lengths of hex head bolts and hex head set screws in this thread size.

Fastener Material Key
BZP-8.8	Bright Zinc Plated (BZP) Class 8 High Tensile Steel - The general purpose high tensile grade for screws and bolts, with a basic level of corrosion resistance.

less...

more...

image chamfer for Hex Head Bolts DIN 931 (ISO 4014)

Hex Head Bolts DIN 931 (ISO 4014) in Bright Zinc Plated (BZP) Class 8 High Tensile Steel

The most common type of fastener, a hex head bolt is designed to be tightened with a standard spanner or ratchet and socket. Popularly used in all assemblies, a standard hex bolt is a staple across the world. Manufactured to ISO 4014 or DIN 931, and therefore includes an unthreaded section of the shaft. A hex drive permits a greater torque load to be applied to the joint over most other drive types. Please note that due to manufacturing limitations, all nylon variants of these items are only "similar to" and not "in absolute accordance with" the standard specified.

BZP-8.8

image chamfer for Hex Head Setscrews DIN 933 (ISO 4017)

Hex Head Setscrews DIN 933 (ISO 4017) in Bright Zinc Plated (BZP) Class 8 High Tensile Steel

Commonly referred to as a setscrew or simply as a bolt. The fully threaded DIN 933 or ISO 4017 should not be confused with its DIN 931 equivalent. A standard spanner or ratchet is typically used to fit this product. Used for decades on all types of assembly throughout the world. As with the DIN 931 hex bolt, the hex drive allows a higher torque to be applied. All parts are to DIN 933 except where shown otherwise. The alternative standard ISO 4017 specifies differences in head dimensions for M10, M12 and M14 thread diameters from DIN 933. Please note that due to manufacturing limitations, all nylon variants of these items are only "similar to" and not "in absolute accordance with" the standard specified.

BZP-8.8