Rivet Nut Flat Knurled Type M10 x 33.5mm (Close) in A4 Stainless

Blind rivet nuts with a flat head, a straight knurled shank and a closed end. Rivet nuts are also known as blind nuts, rivnuts and nutserts. For use with sheet metals and thin gauge metal parts, such as panels, castings and tubes. Rivet nuts are installed using a rivet nut gun, which compresses the thinner walled part, making it push out to form a collar. Rivet nuts, like rivets are installed from one side, which is useful when there is no back access. Flat headed rivet nuts offer the best strength and stability as they spread the load over a greater surface area, with the knurling helping the nut grip the connected materials and stop it from spinning. The closed end will help provide a seal at the joint. Commonly used in white goods, electrical enclosures, indoor and outdoor electronic signs, automotive, aerospace, rail and HVAC. Tightening torque specifications are guide values depending on the material of the original component and must be checked by testing the component.