Stainless Steel Wood Screws & Chipboard Screws

Fastener Material Key
A2	A2 Stainless Steel - Also known as grade 304 or 18/8. A general purpose grade of stainless steel.
A4	A4 Stainless Steel - Also known as grade 316 or 18/8/3. A higher corrosion resistant, marine grade of stainless steel.
BO	Black Oxide (Self Colour) Finished Steel - Non-stainless standard steel grade offering a basic level of corrosion resistance from a black oxide finish.
Brass	Brass - Offers an attractive, corrosion resistant finish.
Nickel Brass	Nickel Plated Brass - Nickel finished brass offering a warm toned white metal aesthetic.
BZP	Bright Zinc Plated (BZP) Steel - Non-stainless standard steel grade offering a basic level of corrosion resistance.
Nylon Grey	Plastic (Grey Nylon Polyamide) - A tough lightweight plastic, tough at low temperaures, with excellent resistance to chemicals and features a favourable sliding friction behaviour.
YZP	Yellow Zinc Plated (YZP) Steel - Non-stainless standard steel grade offering a basic level of corrosion resistance but with a Bright Yellow finish.

Slotted Countersunk Wood Screws DIN 97 in A2 Stainless Steel

Slotted Countersunk Woods Screw giving a flush, smooth and snagfree finish when used. Please refer to dimensions on the datasheet when replacing existing wood screws, as there can be variation between actual and nominal diameters.

A2

2.5

3

3.5

4

4.5

5

5.5

6

8

Slotted Countersunk Wood Screws DIN 97 in A2 Stainless Steel

Slotted Countersunk Woods Screw giving a flush, smooth and snagfree finish when used. Please refer to dimensions on the datasheet when replacing existing wood screws, as there can be variation between actual and nominal diameters.

A2

2.5

3

3.5

4

4.5

5

5.5

6

8

Slotted Round Head Wood Screws DIN 96 in A2 Stainless Steel

Slotted Round Head Wood Screw. Round/Dome shaped head gives an attractive finish when fitted. Please refer to dimensions on the datasheet when replacing existing wood screws, as there can be variation between actual and nominal diameters.

A2

2.5

3

3.5

4

4.5

5

5.5

6

Slotted Round Head Wood Screws DIN 96 in A2 Stainless Steel

Slotted Round Head Wood Screw. Round/Dome shaped head gives an attractive finish when fitted. Please refer to dimensions on the datasheet when replacing existing wood screws, as there can be variation between actual and nominal diameters.

A2

2.5

3

3.5

4

4.5

5

5.5

6

Slotted Raised Countersunk Wood Screws DIN 95 in A2 Stainless Steel

Slotted Raised Countersunk Wood Screw giving an attractive finish when fitted. Please refer to dimensions on the datasheet when replacing existing wood screws, as there can be variation between actual and nominal diameters.

A2

2.5

3

3.5

4

4.5

5

5.5

6

8

Slotted Raised Countersunk Wood Screws DIN 95 in A2 Stainless Steel

Slotted Raised Countersunk Wood Screw giving an attractive finish when fitted. Please refer to dimensions on the datasheet when replacing existing wood screws, as there can be variation between actual and nominal diameters.

A2

2.5

3

3.5

4

4.5

5

5.5

6

8

Coach Screws DIN 571 in A2 Stainless Steel

Coach screws, also known as lag bolts or lag screws, are a heavy duty wood screw with a hexagonal head. They are usually employed in joining timbers or attaching metalwork to timber. Available in a broad range of sizes and materials for use in projects of varying scale and environments.

A2

5

6

8

10

12

Coach Screws DIN 571 in A2 Stainless Steel

Coach screws, also known as lag bolts or lag screws, are a heavy duty wood screw with a hexagonal head. They are usually employed in joining timbers or attaching metalwork to timber. Available in a broad range of sizes and materials for use in projects of varying scale and environments.

A2

5

6

8

10

12

Torx Countersunk Chipboard Screws in A2 Stainless Steel

General purpose wood screws with a Torx drive; also known as star, 6 lobe, and hexalobular internal. The torx drive is designed to prevent "cam out", which makes them ideal for use with modern drill/drivers. The countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. Please note that the head shape can vary between a countersunk, double countersunk, and bugle shape.

A2

3

3.5

4

4.5

5

6

8

10

Torx Countersunk Chipboard Screws in A2 Stainless Steel

General purpose wood screws with a Torx drive; also known as star, 6 lobe, and hexalobular internal. The torx drive is designed to prevent "cam out", which makes them ideal for use with modern drill/drivers. The countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. Please note that the head shape can vary between a countersunk, double countersunk, and bugle shape.

A2

3

3.5

4

4.5

5

6

8

10

Torx Raised Countersunk Chipboard Screws in A2 Stainless Steel

General purpose wood screws with a torx drive raised countersunk head. Raised countersunks tend to be used where the screw head is going to be seen, as it gives a more attractive look than the flat countersunk and a softer edge. A countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. Please note, these screws can sometimes come with a partially threaded shank.

A2

3

3.5

4

4.5

5

6

Torx Raised Countersunk Chipboard Screws in A2 Stainless Steel

General purpose wood screws with a torx drive raised countersunk head. Raised countersunks tend to be used where the screw head is going to be seen, as it gives a more attractive look than the flat countersunk and a softer edge. A countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. Please note, these screws can sometimes come with a partially threaded shank.

A2

3

3.5

4

4.5

5

6

Pozidrive Countersunk Chipboard Screws in A2 Stainless Steel

General purpose wood screws with a pozidriv countersunk head. The countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. Standard A2 stainless steel and the marine grade A4 stainless steel are particularly good where the screw heads are visible in outdoor or in humid/wet enviroments, such as bathrooms and kitchens. Where we have part thread versions, we have listed them separately below. We also stock the stainless steel torx drive version of these wood screws. Please note that the head shape can vary between a countersunk, double countersunk, and bugle shape.

A2

3

3.5

4

4.5

5

6

Pozidrive Countersunk Chipboard Screws in A2 Stainless Steel

General purpose wood screws with a pozidriv countersunk head. The countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. Standard A2 stainless steel and the marine grade A4 stainless steel are particularly good where the screw heads are visible in outdoor or in humid/wet enviroments, such as bathrooms and kitchens. Where we have part thread versions, we have listed them separately below. We also stock the stainless steel torx drive version of these wood screws. Please note that the head shape can vary between a countersunk, double countersunk, and bugle shape.

A2

3

3.5

4

4.5

5

6

Pozidrive Pan Head Chipboard Screws in A2 Stainless Steel

General purpose wood screws with a pozidrive pan shaped head. Please note that these screws may include a partially threaded shank.

A2

3

3.5

4

4.5

5

6

Pozidrive Pan Head Chipboard Screws in A2 Stainless Steel

General purpose wood screws with a pozidrive pan shaped head. Please note that these screws may include a partially threaded shank.

A2

3

3.5

4

4.5

5

6

Pozidrive Raised Countersunk Chipboard Screws in A2 Stainless Steel

General purpose wood screws with a pozidrive raised countersunk head. Raised countersunks tend to be used where the screw head is going to be seen, as it gives a more attractive look than the flat countersunk and a softer edge. A countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. Please note, these screws can sometimes come with a partially threaded shank.

A2

3

3.5

4

4.5

5

6

Pozidrive Raised Countersunk Chipboard Screws in A2 Stainless Steel

General purpose wood screws with a pozidrive raised countersunk head. Raised countersunks tend to be used where the screw head is going to be seen, as it gives a more attractive look than the flat countersunk and a softer edge. A countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. Please note, these screws can sometimes come with a partially threaded shank.

A2

3

3.5

4

4.5

5

6

	on UK orders of over £40 nett.
	on orders to Sweden over £80 nett.