Home   /   Pins, Clips and Rivets   /   Split Pin (Cotter Pin) 2.5 x 22mm in A2 Stainless - DIN 94

Split Pin (Cotter Pin) 2.5 x 22mm in A2 Stainless - DIN 94

Cotter Pins, also known as Split Pins are designed to be inserted through a hole and bent to secure in place, they are commonly made from wire which is semi-circular in cross section and square cut at the end, other specialist end finishes include Mitre or Bevel. Lengths are measured from the end of the tines to the point the base of the eyelet hole contacts with the host material. An unthreaded fastener solution for single use, as bending fatigue can cause failure if re-used.
Cotter Pins (DIN 94) in A2 image
technical drawing of Cotter Pins (DIN 94)
Technical Summary
d nom. nominal diameter 2.5
d max. maximum diameter 2.3
d min. minimum diameter 2.0
A max. max. dimension 2.5
A min. min. dimension 1.25
B approx. dimension approx. 5.0
C max. max. dimension 4.6
C min. min. dimension 4.0
Standard DIN 94
Material A2 Stainless Steel
all dimensions in millimetres (mm)
datasheet
Description Sale Qtys Qty Price Breakdown Despatch Estimate
Split Pin (Cotter Pin) 2.5 x 22mm in A2 Stainless
(WF48972)
£2.44
Split Pin (Cotter Pin) 2.5 x 22mm in A2 Stainless   (WF48972)
£2.44
Prices are subject to quantity discounts based on a sliding scale. Enter the desired quantity in the relevant box in the table above. This will automatically calculate a line price indicating the applicable rate for the quantities selected. All prices shown exclude VAT.
technical drawing of Cotter Pins (DIN 94)
Technical Summary
d nom. nominal diameter 2.5
d max. maximum diameter 2.3
d min. minimum diameter 2.0
A max. max. dimension 2.5
A min. min. dimension 1.25
B approx. dimension approx. 5.0
C max. max. dimension 4.6
C min. min. dimension 4.0
Standard DIN 94
Material A2 Stainless Steel
all dimensions in millimetres (mm)
datasheet