Home   /   Bolts and Machine Screws - Metric   /   Hex Bolt Full Thread Fine M10x1.25 x 20mm in A2 Stainless - DIN 961

Hex Bolt Full Thread Fine M10x1.25 x 20mm in A2 Stainless - DIN 961

A metric fine thread version of the common DIN 933 / ISO 4017 hexagon head set screw. Fine pitch variant screws have some distinct advantages over their coarse pitch counterparts. Size for size they are stronger than the coarse thread versions "in tension" as there is a larger stress (contact) area. They also have a larger minor diameter meaning shear is less likely. Fine Pitch set screws have less tendancy to loosen as they have a much smaller thread incline. Fine pitch bolts should be preferred if being used to adjust settings, as they give closer, more precise control. Some downsides of using Fine pitch bolts or screws are they are slower to install, so not ideal where quick fitment and removal are required and they are also more likely to suffer from thread galling (see our reference section).
Hex Head Setscrews with fine pitch DIN 961 in A2 image
technical drawing of Hex Head Setscrews with fine pitch DIN 961
Technical Summary
d nominal diameter M10x1.25
thread pitch thread pitch 1.25
k max. maximum head height 6.4
s drive size 17 (16)
e width across corners 18.90
Standard DIN 961
Material A2 Stainless Steel
all dimensions in millimetres (mm)
datasheet
Description Sale Qtys Qty Price Breakdown Despatch Estimate
Hex Bolt Full Thread Fine M10x1.25 x 20mm in A2 Stainless
(WF58340)
£7.22
Hex Bolt Full Thread Fine M10x1.25 x 20mm in A2 Stainless   (WF58340)
£7.22
Prices are subject to quantity discounts based on a sliding scale. Enter the desired quantity in the relevant box in the table above. This will automatically calculate a line price indicating the applicable rate for the quantities selected. All prices shown exclude VAT.
technical drawing of Hex Head Setscrews with fine pitch DIN 961
Technical Summary
d nominal diameter M10x1.25
thread pitch thread pitch 1.25
k max. maximum head height 6.4
s drive size 17 (16)
e width across corners 18.90
Standard DIN 961
Material A2 Stainless Steel
all dimensions in millimetres (mm)
datasheet