Home   /   UNC Bolts, Nuts and Washers   /   UNC Hex Head Setscrews ASME B18.2.1 9/16 inch in Bright Zinc Plated (BZP) USA grade 5 high tensile steel

UNC Hex Head Setscrews ASME B18.2.1 9/16 inch in Bright Zinc Plated (BZP) USA grade 5 high tensile steel

Commonly referred to as a setscrew and longer versions are referred to in the United States as a tap bolt. A standard spanner or ratchet is typically used to fit this product. Used for decades on all types of assembly throughout the world. The hex drive allows a higher torque to be applied. Produced to ASME B18.2.1.
Image of UNC Hex Head Setscrews ASME B18.2.1 in BZP-G5 image
technical drawing of UNC Hex Head Setscrews ASME B18.2.1
Technical Summary
d nominal diameter 9/16
k head height 0.371
s drive size 0.812
Standard ASME B18.2.1,ASTM F593-(CW)
Material Bright Zinc Plated (BZP) USA grade 5 high tensile steel
all dimensions in millimetres (mm)
datasheet
Prices are subject to quantity discounts based on a sliding scale. Enter the desired quantity in the relevant box in the table above. This will automatically calculate a line price indicating the applicable rate for the quantities selected. All prices shown exclude VAT.
technical drawing of UNC Hex Head Setscrews ASME B18.2.1
Technical Summary
d nominal diameter 9/16
k head height 0.371
s drive size 0.812
Standard ASME B18.2.1,ASTM F593-(CW)
Material Bright Zinc Plated (BZP) USA grade 5 high tensile steel
all dimensions in millimetres (mm)
datasheet