Home   /   Bolts and Machine Screws - Metric   /   Phillips Pan Head Machine Screws DIN 7985 H M2.5 in A2 Stainless Steel

Phillips Pan Head Machine Screws DIN 7985 H M2.5 in A2 Stainless Steel

A Machine screw with a phillips drive, designed to be tightened with a screwdriver. Typically found on consumer electronics and other small machinery where high torque fasteners are not necessary. Conforms with DIN 7985. Sometimes considered more attractive than a pozidriv equivalent.
Phillips Pan Head Machine Screws DIN 7985 H in A2 image
technical drawing of Phillips Pan Head Machine Screws DIN 7985 H
Technical Summary
d nominal diameter M2.5
thread pitch thread pitch 0.45
dk head diameter 5.0
k head height 2.0
v head cylinder height 1.3
a unthread length 0.9
rf dome radius 5
s drive size P 1
Standard ISO 7045 (DIN 7985/H)
Material A2 Stainless Steel
all dimensions in millimetres (mm)
DIN 7985 Standard HTML
DIN 7985 Standard PDF
Prices are subject to quantity discounts based on a sliding scale. Enter the desired quantity in the relevant box in the table above. This will automatically calculate a line price indicating the applicable rate for the quantities selected. All prices shown exclude VAT.
technical drawing of Phillips Pan Head Machine Screws DIN 7985 H
Technical Summary
d nominal diameter M2.5
thread pitch thread pitch 0.45
dk head diameter 5.0
k head height 2.0
v head cylinder height 1.3
a unthread length 0.9
rf dome radius 5
s drive size P 1
Standard ISO 7045 (DIN 7985/H)
Material A2 Stainless Steel
all dimensions in millimetres (mm)
DIN 7985 Standard HTML
DIN 7985 Standard PDF