Home   /   Bolts and Machine Screws - Metric   /   A2 Stainless Steel M3 Hex Head Setscrews DIN 933 (ISO 4017)

A2 Stainless Steel M3 Hex Head Setscrews DIN 933 (ISO 4017)

Commonly referred to as a setscrew or simply as a bolt. The fully threaded DIN 933 or ISO 4017 should not be confused with its DIN 931 equivalent. A standard spanner or ratchet is typically used to fit this product. Used for decades on all types of assembly throughout the world. As with the DIN 931 hex bolt, the hex drive allows a higher torque to be applied. All parts are to DIN 933 except where shown otherwise. The alternative standard ISO 4017 specifies differences in head dimensions for M10, M12 and M14 thread diameters from DIN 933. Please note that due to manufacturing limitations, all nylon variants of these items are only "similar to" and not "in absolute accordance with" the standard specified.
Hex Head Setscrews DIN 933 (ISO 4017) in A2 image
technical drawing of Hex Head Setscrews DIN 933 (ISO 4017)
Technical Summary
d nominal diameter M3
thread pitch thread pitch 0.50
k max. maximum head height 2.0
s drive size 5.5
e width across corners 6.01
Standard ISO 4017 (DIN 933)
Material A2 Stainless Steel
all dimensions in millimetres (mm)
datasheet
Prices are subject to quantity discounts based on a sliding scale. Enter the desired quantity in the relevant box in the table above. This will automatically calculate a line price indicating the applicable rate for the quantities selected. All prices shown exclude VAT.
technical drawing of Hex Head Setscrews DIN 933 (ISO 4017)
Technical Summary
d nominal diameter M3
thread pitch thread pitch 0.50
k max. maximum head height 2.0
s drive size 5.5
e width across corners 6.01
Standard ISO 4017 (DIN 933)
Material A2 Stainless Steel
all dimensions in millimetres (mm)
datasheet